|Display range:||0-1.5 m/s (0-1000fpm)|
|Alarm range:||0-1.5 m/s (0-1000 fpm)|
|Control range:||Face velocity control .15 to 1 m/sec (30-200fpm)|
|Control resolution:||0.1 m/sec (2fpm)|
|Control output:||0-10VDC control output for damper, valve or Inverter drive|
|Control response:||Less that 1 second|
|Analog output:||Additional 0-10v output, directly proportional to face velocity (optional)|
|Accuracy:||Sensor / display resolution 0.1m/sec (1fpm) Face velocity accuracy +/- 10%|
|Field set-up:||2-point velocity calibration (with on-screen instructions)|
|Alarm delays:||User configurable – 0 to 10secs|
|Comm. Port:||RS485 – Can be connected via Serial interface to LAN network (Full software available)|
|Auxiliary pushbuttons:||3 (typically used for fan start/stop, light on/off, scrubber pump on/off, emergency purge, etc. Buttons can be interlocked to each other.)|
|Sash high indication:||Yes, with separate plug-in connection|
|External alarm indication:||Yes|
|Power Requirement:||Input—240VAC, 50Hz (UK) 230VAC 50Hz (Euro) 120VAC 60Hz (US) Output—15VDC, 500ma|
|Units:||English and Metric (user selectable)|
|Display—visual:||VAV output Bar Graph / LEDs: red, alarm; yellow, caution; green, normal / Digital display of velocity reading (can be turned off)|
|Alarm indication:||Red LED & audible alarm (to a certain sound spec)|
|Horn silence:||Yes (temporary / permanent/automatic depending on type of alarm or external input )|
|Mounting:||Flush (or surface with optional mounting box)|
|Monitor operating temp:||55-86°F (13-30°C)|
|SM6 operating temp:||15-25°C (Environmental limits)|
|SM6 working temp:||ambient +25°C|
|SM6 output mV:||0-90 mV over working range (0-1.5m/sec).|
|Storage temperature:||-40-150°F (-40-65°C)|
|Hazardous area:||SM6 Suitable for Gas group llC Temp Class T6 (With Atex certified MTL Zener Barriers).|
|Model||Style||Power Supply||Airflow Sensor Type||Sensor Cable||Comms|
|E||MK2||US - 120v 60Hz
Euro - 230v 50Hz
UK - 240v 50Hz
MPC - (Modbus RTU)
The AFA1000/E Airflow monitor is supplied complete with a plug in type power supply for connection to a single gang socket. The mains supply should be fused 3A.
A desktop style power supply can be supplied with flying mains lead for connection to a fused spur or terminals.
For damper control a remote interface unit is supplied. The remote interface unit is supplied with a 2M figure 8 mains lead for connection to a single gang socket. The mains supply should be fused 3A. The interface unit provides power to the AFA1000/E and the damper actuator (30VDC unregulated).
The standard AFA1000/E is supplied with a remote type airflow sensor and has a plug in RJ11 socket on the rear of the case to accept the sensor cable.
A vent it can be supplied for connection to the Fume Cupboard inner sidewall, this comprises of 1M of 25mm vent tube, a 25mm Bush and Coupling and box lid. See EVK on accessories page.
The standard length of a remote type sensor cable is 2M, a 5M version is also available. Custom lengths can be supplied on request.
The AFA1000/E can be supplied with configuration software and cable for connections to a laptop for diagnostics and configuration of the monitor or for connection via a local Modbus RTU network for remote logging with real time graphical displays using the AFA Network software or for direct connection to a BMS system. See Modbus RTU Comms on additional features page.
The AFA1000/E MK2 can be supplied with a custom overlay (details on request).
The AFA1000/E airflow monitor range includes the following accessories:-
The AFA1000/E airflow monitor will operate with any of the following airflow sensors:-